LED Batten Lighting

LED Batten Lighting

Lynx

Industrial LED Batten Lighting

Description

A slim white painted steel body with an Opal reeded diffuser.
Utilising 3 body lengths for both standard and high lumen outputs.

Its design and construction allows for direct replacement of traditional fluorescent batten fittings.

Share on facebook
Share on twitter
Share on linkedin
Share on whatsapp
Share on email
IP 0
IP RATING
IK 0
IK RATING
Year 0
Warranty

Key Features

  • Central cable entry to the rear.
  • BESA Fixings and optional
    conduit knockout to the end.
  • Snap-fit diffuser.
    Steel Body Opal Diffuser.
  • 4ft/5ft/6ft Variants

Applications

Low level industrial mezzanines, workshops, commercial garages, corridors and storage rooms.

Downloads

Datasheet

CodeTypeWattsLumensColour TempLength (mm)Width (mm)Height (mm)IP Rating
LXLY4S/25/4K4FT SINGLE25W25004000K1220mm64mm60mmIP20
LXLY4T/45/4K4FT TWIN45W45004000K1220mm64mm60mmIP21
LXLY5S/30/4K5FT SINGLE30W30004000K1524mm64mm60mmIP22
LXLY5T/60/4K5FT TWIN60W60004000K1524mm64mm60mmIP23
LXLY6S/50/4K6FT SINGLE50W50004000K1829mm64mm60mmIP24
LXLY6T/75/4K6FT TWIN75W75004000K1829mm64mm60mmIP25

Options: Add the below suffix to order.

/DALI – Dali Dimming

/M3 – Emergency

/BFS – Batten Fit Sensor

Project Design Enquiry Request
Contact Us

Our services

On-site Survey Analysis

Initial client consultation to identify the design brief and what the customer needs to achieve from their lighting installation. Organise a site meeting with the relevant parties, conduct a site survey with plans and drawings to allow us to propose the best solution to meet the criteria.

Lighting Design Calculation

Utilising RELUX software to produce lighting design calculations specific to each area of the Project. These are calculated and designed to meet the specific lighting requirements to CIBSE or the provided Project Specification issued by the Consultant.​

Energy Saving Report

In-depth payback analysis which includes energy savings, C02 and return on investment specifically for the Project.

Luminaire Commissioning

Delivering full project managed solutions and commissioned by our own engineers or a specific Connected Lighting system partner Commissioning Engineer. As we are manufacturer’s we can offer to pre-set a selection of the performance and time-out parameters of the lighting control sensors at the factory prior to delivery. Therefore saving time on the installation of the luminaires and reduced hours on site Commissioning.

ROI Analysis

Compile real time data log results and identify achievable savings using the actual working hours and electricity costs of the client. Allowing all to be confident in the performance of selected system.

Warranty Support

Our luminaires are independently and fully tested by our supply partners at their facilities to ensure a full luminaire system warranty can be supported by ourselves and their ‘after-sales’ team if necessary.